
WIN30030
Sectional decoration in modules (20x20)
Pack of 24 laminations comprising 1 graphics
Adhesive sectional decoradion in modules 20x20 cm
Final size of the decoration 120x80 cm
The colors represented in paper or digital catalogues are approximate. For more information consult technical notes.
TILESKIN® WILL BE SUPPLIED IN A 2 mm SMALLER SIZE COMPARED TO SIZE OF THE SELECTED TILE, TO FACILITATE THE INSTALLATION OF THE PRODUCT.
Choose the finish:
- Only Dress: matte elegant finish (3 years life-span)
- Smell Trap: matte finish with smell-absorbing property (5 years life-span)
- No Slip: walkable finish to indoor use (3 years life-span)
- Only Dress Bright: brillant bright finish (3 years life-span)
- Heat Resistant: bright and Heat resistant finish (2 years life-span)
Sectional decoration in modules (20x20)
Adhesive sectional decoradion in modules size 19,8x19,8 cm, suggested for wall tiles size 20x20 cm
To request formats other than the standard one, please write to info@tileskin.com
Finishes available:
- Only Dress: matte elegant finish (3 years life-span)
- Smell Trap: matte finish with smell-absorbing property (5 years life-span)
- No Slip: walkable finish to indoor use (3 years life-span)
- Only Dress Bright: brillant bright finish (3 years life-span)
- Heat Resistant: bright and Heat resistant finish (2 years life-span)
Installing and removing
Tileskin® is a product thath could be applied in DIY mode very easily, it could be replaced until 10 times while applying and once removed no glue remain on the surface. For more information visit "Installing and removing" section of the technical catalogue.
Storage
TILESKIN® has to be stored in a dry place away from heat sources that could affect the quality of the product.
Although it is not dangerous or harmful to human health, keep away from children and avoid contact with mouth and eyes. Apply only on smooth and well prepared tiles, avoiding any other use.
Cleaning
TILESKIN® can be cleaned with normal non-aggressive detergents of a neutral Ph, preferably based on natural soap. As it is a plastic, self-adhesive product, it must be treated with all due care to prevent accidental detachment during cleaning and chemical aggression in the case of use of unsuitable detergents.
TILESKIN® Smell Trap Maintenance
The product with SMELLTRAP smell absorbing function requires activation and regeneration to guarantee its odour-absorbing capacity. When applied at the correct ratio required for the SMELLTRAP function, activation and regeneration are then essential to ensure the product continues to efficiently absorb smells. Check instruction in the technical catalogue, "Maintenance".
For more information read the FAQ, or contact us at info@tileskin.com